United States
Contact
Contact Finder Location Finder Feedback for the President Contact us
myHYDAC
Request a Quote
The TTC 2038XS is an I/O slave module which is designed for distributed safety applications that require a high number of PWM outputs in remote locations and cost-sensitive projects. The TTC 2038XS is designed following functional safety standards and is certified by TÜV NORD. It is equipped with Infineon’s TriCore™ Aurix™ TC367 CPU and meets the requirements in state-of-the-art safety relevant applications.

The TTC 2038XS is part of a complete and compatible product range for the off-highway and automotive industries. The module is protected by a compact automotive style housings which is perfectly suited for harsh operating conditions.

The TTC 2038XS is controlled using the CANopen® Safety protocol. The module provides a wide range of flexible configurable I/Os and allows local current control using PWM outputs.
Unit of Measure

Specifications

Model Code Description

 N/A TTC 2038XS-F13-00-FS5-000

Weight

 N/A 0.73 lb

Operating Temperature [Min]

 N/A -40 ºC

Operating Temperature [Max]

 N/A 85 ºC

Output Type

 N/A
  • 8 x PWM OUT up to 1 kHz or digital OUT, up to 4 A, high side, with current measurement, alternative use as digital timer IN (0.1 Hz - 20 kHz) configurable pull-up in groups of 2 or analog IN 12 bit, 0 - 32 V with configurable pull-up or LED control OUT
  • 6 x digital OUT up to 4 A, high side, current sense, alternative use as PVG OUT, 10 - 90% of BAT+ or voltage OUT 0 V - 75 % BAT+ or LED control OUT or
  • analog IN 12 bit, 0 - 32 V2 x PWM OUT up to 4 kHz, up to 4 A, low side, current measurement, featuring timer feedback alternative use digital timer IN (0.1 Hz - 20 kHz) or analog IN 12 bit, 0 - 5 V, 0 - 32 V

Input Type

 N/A
  • 8 x analog IN 12 bit, 0 - 5 V, 0 - 25 mA, 0 - 100 kOhm, LED control
  • 2 x Node ID modifier pins
  • 2 x digital timer IN (0.1 Hz - 20 kHz), encoder support, configurable pull-up/down, support for 7/14 mA current loop speed-sensor alternative use as analog IN 12 bit, 0 - 32 V, 0 - 25 mA
  • 4 x digital timer IN (0.1 Hz - 20 kHz), encoder support, configurable pull-up alternative use as analog IN 12 bit, 0 - 32 V or SENT interface or digital IN for switching to GND and BAT+
  • 1 x Terminal 15
  • 1 x Wake-Up

Other

 N/A
  • 1 x sensor supply, 5 V, max. 150 mA

Length

 N/A 147 mm

Height

 N/A 38 mm

Width

 N/A 92 mm

Minimum Connector Release Clearance Length

 N/A 208 mm

Minimum Connector Release Clearance Width

 N/A 92 mm

Minimum Connector Release Clearance Height

 N/A 38 mm

Connector

 N/A 48 pins

Operating Altitude

 N/A 0 to 4000 m

Supply Voltage

 N/A 8 to 32 V

Maximum Standby Current

 N/A ≤ 0.8 mA

Maximum Current

 N/A 24 A

Functional Safety

 N/A EN ISO 13849 PL d IEC 61508 SIL2 ISO 19014 MPL d ISO 25119 AgPL d SRL2 ISO 26262 ASIL C

CE - Mark

 N/A 2006/42/EC 2014/30/EU

E - Mark

 N/A ECE-R10 Rev.6

Electromagnetic Compatibility (EMC)

 N/A CISPR 25 EN 13766 IEC 61000-4-2/-3/-4/-5/-6/-8 IEC 61000-6-4 ISO 14982

Electrostatic Discharge (ESD)

 N/A ISO 10605

Ingress Protection (IP) Class

 N/A EN 60529 IP65 and IP67 ISO 20653 IP6k9k

Climatic

 N/A ISO 16750-4

Equipment Options

 N/A Standard

CPU Core

CPU Core

 N/A
  • 32-Bit Infineon TriCore™ Aurix™ TC367
  • 2 cores (lockstep cores) running at 300 MHz and memory protection for safety-relevant applications
  • Floating-Point Unit and Hardware Security Module
  • 576 KB int. SRAM, 4 MB int. Flash
  • 128 KB int. EEPROM emulation

Interface

Interface

 N/A
  • 1 x CAN 50 kbit/s up to 1 Mbit/s
  • 4 x SENT with SPC support

Software

Software

 N/A CANopen® Safety I/O Module software preinstalled

Note

N/A All inputs and outputs supporting analog IN can also be used as digital Input. All I/Os and interfaces are protected against short circuit to GND and BAT. Board temperature, sensor supply, and supply voltage are monitored by software. One safety shut-off group for PWM output stages is available.